收藏本站
B81123
Y1 / 250 V AC
1.3
General notes on soldering
Permissible heat exposure loads on film capacitors are primarily characterized by the upper cate-
gory temperature T max . Long exposure to temperatures above this type-related temperature limit
can lead to changes in the plastic dielectric and thus change irreversibly a capacitor's electrical
characteristics. For short exposures (as in practical soldering processes) the heat load (and thus
the possible effects on a capacitor) will also depend on other factors like:
Pre-heating temperature and time
Forced cooling immediately after soldering
Terminal characteristics:
diameter, length, thermal resistance, special configurations (e.g. crimping)
Height of capacitor above solder bath
Shadowing by neighboring components
Additional heating due to heat dissipation by neighboring components
Use of solder-resist coatings
The overheating associated with some of these factors can usually be reduced by suitable coun-
termeasures. For example, if a pre-heating step cannot be avoided, an additional or reinforced
cooling process may possibly have to be included.
EPCOS recommends the following conditions:
Pre-heating with a maximum temperature of 110 ° C
Temperature inside the capacitor should not exceed the following limits:
MKP/MFP 110 ° C
MKT 160 ° C
When SMD components are used together with leaded ones, the leaded film capacitors should
not pass into the SMD adhesive curing oven. The leaded components should be assembled af-
ter the SMD curing step.
Leaded film capacitors are not suitable for reflow soldering.
Uncoated capacitors
For uncoated MKT capacitors with lead spacings ≤ 10 mm (B32560/B32561) the following mea-
sures are recommended:
pre-heating to not more than 110 ° C in the preheater phase
rapid cooling after soldering
Please read Cautions and warnings and
Important notes at the end of this document.
Page 11 of 18
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
B81130C1225M CAP FILM 2.2UF 760VDC RADIAL
B82422A3120K100 INDUCTOR .012UH 700MA 1210 10%
B82422H1683K INDUCTOR 68UH 180MA 1210 10%
B82422T1683K INDUCTOR 68UH 60MA 1210 10%
B82432C1473K INDUCTOR 47UH 210MA 1812 10%
B82432T1393K INDUCTOR 39UH 380MA 1812 10%
B82442A1224K INDUCTOR 220UH 170MA 2220 10%
B82442H1475K INDUCTOR 4700UH 50MA 2220 10%
相关代理商/技术参数
B81123-C1103M 制造商:未知厂家 制造商全称:未知厂家 功能描述:KONDENSATOR 10NF
B81123C1103M 制造商:TDK-EPC 功能描述:CAPACITOR CLASS Y1 10NF
B81123C1103M000 制造商:EPCOS 制造商全称:EPCOS 功能描述:EMI Suppression Capacitors (MKP)
B81123-C1103-M000 制造商:EPCOS 功能描述:Cap Film 0.01uF 250VAC PP 20% 26.5 X 10.5 X 16.5mm RDL 22.5mm Bulk 制造商:EPCOS 功能描述:Cap Film Suppression Y1 0.01uF 250VAC PP 20% (26.5 X 10.5 X 16.5mm) Radial 22.5mm 100
B81123C1103M004 制造商:EPCOS 功能描述:B81123C1103M004
B81123C1103M189 功能描述:薄膜电容器 Film Cap 10NF 20% 250V MKP Y1 RoHS:否 制造商:Cornell Dubilier 产品类型: 电介质:Polyester 电容:0.047 uF 容差:10 % 电压额定值:100 V 系列:225P 工作温度范围:- 55 C to + 85 C 端接类型:Radial 引线间隔:9.5 mm
B81123C1103M289 制造商:EPCOS 制造商全称:EPCOS 功能描述:EMI Suppression Capacitors (MKP)
B81123C1152M 功能描述:薄膜电容器 0.0015uF 250VAC 6x11x18mm RoHS:否 制造商:Cornell Dubilier 产品类型: 电介质:Polyester 电容:0.047 uF 容差:10 % 电压额定值:100 V 系列:225P 工作温度范围:- 55 C to + 85 C 端接类型:Radial 引线间隔:9.5 mm